![]() Note: For 24V inputs replace R10, R12, R13, R15, and R16 with 2K2 Ohms. All inputs has 470E for TTL Voltage input required driving the inputs. The board has 12 output pins that can control various devices such as stepping motor drivers, Plasma Torch, Pump for coolant, spindle, 5 Input pins are provided for limit or home switches, feedbacks, Emergency switch. USB connector and CN5 Screw terminal provided for PC side power supply input and CN4 for output side power supply 7 to 36V DC. The Opt coupler and inverter require power supply at both PC side and output side. ![]() ![]() All outputs are optically isolated and inverse, all inputs are optical isolated and can be used as emergency switch, limit switch, home switch and feedbacks. Mach3 was designed to use this port to send the step, and direction pulse to the CNC controller and receive some inputs back such as limit switches. It was mainly used to connect a PC to a printer. The board has been tested with MACH3 CNC software. Mach3 Main Screen The parallel port has been discontinued on PCs for many years now. ![]() Optically isolated parallel port break out board designed for Hobby CNC, Routers and Motion controller, This Board is an easy solution to drive stepper Motor driver through PC parallel port, The Board is compatible with various CNC software specially made for LPT port data output. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |